Luxon - Gen2 Triple Clamps - Black - w/o bar mounts

Although the stock KTM/HQV/GasGas triple clamps are lighter, they lack torsional stiffness and strength. The concept is to increase torsional stiffness for more precise steering while increasing longitudinal flex for comfort. These clamps feature an optimized balance of stiffness, stiffer in torsion for precise steering while also stiffer vertically to maintain fork alignment but with enough flexure in lateral and longitudinal directions for comfort and rideability.  The split lower clamp design allows the fork tubes to flex more smoothly in the clamp to allow smoother suspension stroke. Basically, you want the clamps to be strong enough to allow the suspension to work more freely without a large amount of flex but a balance is required for comfort and that is what Luxon has achieved.  

Luxon Gen2 Triple Clamps are compatible with any bar mount that fits stock 2016-2023 KTM/Husqvarna rubber mounted triple clamps however if you plan to re-use the OEM bar mounts, the Luxon anti-twist mounts are highly recommended (fit 1s 1/8 handlebars). Luxon triple clamps use exact same bar position as stock 2016-2023 rubber mounted KTM/HQV clamps and utilize the same bar mount height/offset. 

Includes:

• Upper and Lower clamps
• Steering stem 
• OEM SKF lower steering bearing/race/seal pre-installed 
• Titanium bolts 
• Anti-seize
• Steering stem bolt

Features:

• 22mm Offset 
• Stiffer than OEM 
• More precise feel over OEM 
• DOES NOT COME WITH BAR MOUNTS

Fitment:

• KTM 125cc-500cc (2013-2023) 
• HQV 125cc-501cc (2014-2023)