Motion Footpegs - Standard

Motion Factory Racing has designed a patented Flex-Mount footpeg system that provides improved comfort and control that combines anti-vibration technology. The cleats are made from stainless steel machine screws (M3x18mm) with nylock nuts, these can replaced with a quick trip to a local hardware store. The hardware has been designed by Motion Factory Racing to bend rather than break during a significant impact. They recommend using an adjustable wrench to quickly and easily bend the bolt back straight, however the entire system is serviceable and rebuildable. 

NOTE: Bushing Bolts - 8mm Allen Head Bolt - Torque Spec @ 30 ft/lbs. If you are ever installing the platforms onto the spindle the nylon locking nut torque spec is 2 ft/lbs (hand tight) Once you feel it bottom out stop tightening and visually inspect to make sure the nylon in the nut has engaged with the last couple of threads on the spindle. Over-torqueing/tightening will cause the threads to strip and fail.

Features:

• Easily Rebuildable/Serviceable 
• Tunable Flex Rate
• Billet Mounts @ Standard Height
• 2 sizes available 

Fitment:

• KTM 250-500 (1998-2016)
• HSB 250-501 (1999-2014)
• HQV 250-501 (2014-2015)
• KTM 690 End/SM (ALL)
• GG 700 ES/SM (ALL)
• HQV 701 End/SM (ALL) 
• KTM 790-890 ADV (ALL) 
• HQV 901 Norden (ALL) 
• KTM 950-990 (ALL) 
• KTM 1050-1290 ADV (2013-2020)