Cruise Control Kit
Add electronic cruise control to your motorcycle for more comfortable and controlled long-distance riding. This complete kit integrates with the motorcycle's existing electronic systems and includes a durable, weatherproof 3-button handlebar switch.
Triple Button Switch
The Triple Button Switch provides three dedicated controls for operating the cruise control functions. It is fully watertight and designed to mount directly to standard 22 mm handlebars using a fully opening bracket.
- Resume / Increase
- Cancel
- SET / Decrease
Compatible with Aftermarket Accessories
The kit is compatible with aftermarket LED lights and other lighting kits. Installation does not require wire splicing or modification of the brake wiring.
Cruise Control Safety Features
The cruise control module automatically disengages when any of the following conditions occur:
- Engine RPM exceeds 8000 or falls below 1000
- Front or Rear Brake Activated
- Depressing clutch lever alone will not disengage cruise control on EURO4 models
- Bike transmission is in first gear or neutral
- Throttle grip exceeds cruise control by 5%
- Any one of the required CANBUS packets are not updated within 1000 milliseconds
- A difference of 20% between the front and rear wheel speeds
Configuration
The module features a weather-tight USB-C connector for configuration and adjustment of settings, including speed increment size, PID gain, and throttle limits.
Diagnostic Port and Off-Road Module
The kit uses the motorcycle's diagnostic port. A diagnostic splitter is required if a second port is needed for OBD or off-road dongles.
An optional off-road software add-on is also available, which can enable off-road mode without requiring a separate dongle.
Diagnostic Splitter KTM SUMI-MT EURO4
For Off-road Add-on Click Here
Installation
To install this kit you must remove the tank. About 2 hours install time with proper tools. T-harness will override the throttle signals and diagnostic connector will collect important speed data.
Refer to the manufacturer's installation manual for complete installation instructions.
For Install Instructions Click Here
Note: Professional installation is recommended if you are not comfortable working with the motorcycle's fuel system or electrical system.
Fitment:
- KTM: 690 Enduro / SMC — 2014–2025, with white diagnostic connector
- Husqvarna: 701 — 2021–2025, with white diagnostic connector
- Husqvarna: 701 — 2016–2020, with white diagnostic connector — RPM Mode Only
- GasGas: ES 700 — 2022–2024, with white diagnostic connector
RPM Mode Only: These kits maintain speed based on engine RPM and cannot increase or decrease the set speed. Only SET and Cancel functions are available. The manufacturer recommends using the 2-button Soft Touch Switch or a custom switch solution with these kits.
North American Models: All North American Enduro models are currently EURO4.
