Cruise Control Kit
Add electronic cruise control to your motorcycle for more comfortable and controlled long-distance riding. This complete kit integrates with the motorcycle's existing electronic systems and includes a durable, weatherproof 3-button handlebar switch.
Triple Button Switch
The Triple Button Switch provides three dedicated controls for operating the cruise control functions. It is fully watertight and designed to mount directly to standard 22 mm handlebars using a fully opening bracket.
- Resume / Increase
- Cancel
- SET / Decrease
Compatible with Aftermarket Accessories
The kit is compatible with aftermarket LED lights and other lighting kits. Installation does not require wire splicing or modification of the brake wiring.
Cruise Control Safety Features
The cruise control module automatically disengages when any of the following conditions occur:
- Engine RPM exceeds 8,000 or falls below 1,000
- Front brake lever is activated
- Transmission is in first gear or neutral
- Throttle grip position exceeds the cruise control command by 5%
- Any required CANBUS packet is not updated within 1,000 milliseconds
- Front and rear wheel speeds differ by 20% or more
- Rear brake input can be supported with the optional wire tap
- Clutch lever input is not supported
Configuration
The module features a weather-tight USB-C connector for configuration and adjustment of settings, including speed increment size, PID gain, and throttle limits.
Diagnostic Port and Off-Road Module
The kit uses the motorcycle's diagnostic port. A diagnostic splitter is required if a second port is needed for OBD or off-road dongles.
An optional off-road software add-on is also available, which can enable off-road mode without requiring a separate dongle.
Diagnostic Splitter EURO5 MWT
For Off-road Add-on Click Here
Installation
To install this kit you must remove the tank. About 1 -2 hours install time with proper tools. T-harness will override the throttle signals and diagnostic connector will collect important speed data.
Refer to the manufacturer's installation manual for complete installation instructions.
For Install Instructions Click Here
Professional installation is recommended if you are not comfortable working with the motorcycle's fuel system or electrical system.
Fitment:
- KTM: 690 Enduro / SMC — 2021–2026, with red EURO5 diagnostic connector
- Husqvarna: 701 Enduro — 2020–2026, with red EURO5 diagnostic connector
- GasGas: ES 700 — 2022–2025, with red EURO5 diagnostic connector
