Race Series
Race
Series
- Width:
- 1.00 (in)
- Height:
- 1.00 (in)
- Depth:
- 1.00 (in)
Warranty Information
This product carries a 1 year warranty against defects in materials and craftsmanship.Product Details
Not sure what kit is right for you? Click here for our guide chart.
The SAS Valve Removal Dongle will allow you to remove the SAS valve without the FI light coming on just by plugging in into the harness where the SAS valve plug goes. It fools the stock ECU into thinking it is still there. You will still get warning lights for other important items. Look into our SAS 'Stage Kits' for more comprehensive 'plug and play' kits. Fit's all KTM twin cylinder fuel injected bikes.
If KTM 690 (08-13) / Husky 701 (2017) is chosen below, note the picture that will appear. There is no actual plug available for the type of SAS valves used on these bikes so the method we use is to supply a pre crimped and heat shrunk resistor that can be inserted into the harness plug and 100mm of self sealing heat shrink is supplied to seal it from the elements.
