KTM and Husqvarna motorcycles utilize an electronic side stand sensor designed to prevent the motorcycle from engaging gears while the side stand is down. If this sensor fails or the magnet is lost while riding, you could be left stranded. The Vanasche Side Stand Bypass Dongle provides a simple, plug-and-play emergency solution to get you and your motorcycle back to safety.
Compact and easy to carry, this dongle is a great addition to your trail kit for unexpected side stand sensor failures.
IMPORTANT FITMENT INFORMATION
Please review the fitment below and select the correct dongle for your motorcycle. Dongles A, B, and C are not interchangeable. Pay close attention to US/EU model designations. If you're unsure, verify your OEM side stand sensor part number or contact us before ordering.
DONGLE A - FITMENT
Replaces KTM OEM Part #60411045000
- Husqvarna 701 Enduro / Supermoto / Vitpilen: 2017-2024 (US), 2017-2020 (EU)
- KTM 690 Enduro R / SMC R: 2019-2024 (US), 2019-2020 (EU)
- GasGas ES 700 / SM 700: 2023-2024 (US)
- KTM 690 Duke: 2016-2019
- KTM 1090: All years
- KTM 1290 Super Adventure: 2015-2020
- KTM 1290 Super Duke: 2017-2019
DONGLE B - FITMENT
Replaces KTM OEM Part #61011045000
- Husqvarna 701 Enduro / Supermoto: 2016 (All), 2026 (US), 2021-2026 (EU)
- KTM 690 Enduro R / SMC R: 2008-2018 (All), 2026 (US), 2021-2026 (EU)
- GasGas ES 700 / SM 700: EU Models
- KTM 690 Duke: 2008-2015
- KTM 1290 Super Adventure: 2021-2024
- KTM 1290 Super Duke: 2014-2016, 2020-2022
- KTM 1290 (Other Models): 2021-2024 (verify specific model)
DONGLE C - FITMENT
Replaces KTM OEM Part #96311045000
- KTM 390 Enduro R / Adventure R: 2025-2026
FITMENT NOTE: Dongles A, B, and C are not interchangeable. Verify model year, US/EU designation, and OEM sensor part number before ordering.
INSTALLATION
Locate the factory side stand sensor behind the side stand pivot and follow the wiring harness to its connector, typically near the throttle body. With the ignition OFF, disconnect the OEM sensor and connect the appropriate bypass dongle.
WARNING: This product is intended to be carried as an emergency spare and used only when the OEM side stand sensor fails. It should not be installed while the factory sensor is functioning properly. Bypassing the safety system allows the motorcycle to engage gears with the side stand down, potentially resulting in property damage or injury.
